REVOTEC Nanofiltration / Revers Osmoses | Centec Vietnam | Ứng dụng cho nhà máy sản xuất thuốc

Công ty TNHH kỹ thuật công nghệ và dịch vụ Tiên Phong

D5 KDC Miếu Nổi, Đinh Tiên Hoàng, P3, Q.Bình Thạnh

Tell : 0915.980.479        0162.999.888.7

Email :      vinhmv@pitesco.com
Website:   www.pitesvietnam.com                                       
                 www.sensor-encoder.com                   
                 www.hohner.vn

REVOTEC Nanofiltration / Revers Osmoses

• 

Specifications

• Capacity 1 - 150 m3/h
• Residual TDS Down to 1 mg/l
• Electrical consumption 0,5 kW/m3
• Operating pressure inlet 0 - 8 bar
• Operating pressures outlet 2 - 5 bar
• Operation temperature 1 - 60°C
• Material Epoxy / Fibre glass / PP AISI 304 or 316L

Description

In the reversed osmosis process water is forced across a membrane, leaving the impurities behind. The permeability of the membrane can be so small, that practically all impurities, salt molecules, bacteria are being separated from the water

A water treatment process utilizing a membrane to remove dissolved minerals. The process of osmosis occurs in nature, when a pure solution is separated from a saline solution by a semi-permeable membrane. The pure solution passes through the membrane until a pressure differential is reached called the Osmotic Pressure. At this pressure differential, determined by the constituents and concentrations in the saline solution, osmosis stops. Reverse Osmosis reverses this process by applying pressure in excess of the osmotic pressure to the saline solution, forcing water through the membrane. As this occurs, most dissolved solids remain behind and are carried out with the reject stream. The purified water can then be utilized as needed.